How to Reduce Floor Maintenance

Everyone must make regular decisions about maintaining their floors and the costs for it.

Whether your floors have been around for a while or you recently completed your dream kitchen makeover, you want to maintain your floors. After all, your floors are a reflection of your home and can make a significant impact on first impressions.

Shiny floors are a direct reflection of your home. A poor first impression of floor shine can reduce facility appearance scores by as much as 75%. Furthermore, they reduce house maintenance costs. They also prevent buildups of germs. 

However, floor maintenance can get a little expensive. Hence, the practices mentioned below will help you keep your floors gleaming and make a good first impression while reducing some maintenance load as a whole!

Methods to Reduce Floor Maintenance

Keeping the floor maintained and clean is not as easy as it seems. It is work that requires prominent, effort, and constant care. You can do the following routine for good maintenance!

1. Dust Mopping

Dust mopping should always be the first step of every everyday cleaning routine. Dust mopping can aid in the removal of surface dirt, preventing it from being trapped in the finish and causing damage. Avoid oil-based dust mop treatments because they can leave a haze on the surface that absorbs even more dirt. Make sure the mop is clean right away for the best performance. Dust mopping is a cheap and effective way. Adding it to your chores will have your floor maintained and will help you reduce maintenance costs overall.

2.  Damp Mopping

You all would have heard of damp mopping. It is a process that aids in the removal of more minute particulates and oily soil. It also avoids accumulated dirt from darkening or pigmentation of the flooring finish. Use a clean mop head, begin with clean water, and dilute the floor cleaning substance according to the manufacturer’s advice. Also, be careful of mops that are too wet. It might cause the cleaner to leave floors too wet, leaving soil behind. Finally, some brands advise rinsing with fresh water after use. Consider using a no-rinse cleaner, which will help you save time by removing the need to rinse. Damping is effective, and doing it twice a week will provide less effort and budget to maintain.

3. Low-Speed Buffing

Buffing is a method used to clean floors after scrubbing to maintain shine and smoothness.

For your floors, do low-speed buffing as it restores the smooth shine to the finish and delays the need for a recoat. It is one great alternative for a burnisher. If you worry about the cost and after-effects, this is a perfect alternative. Use a spray buff to help repair, a mop-on maintainer for performance, and the right pad for spray buffing for long-lasting results. Also, try to clean the floors thoroughly before buffing. You can do buffing by using buff pads which are cheaper and available at almost every store. Buffing leaves a long-lasting effect and requires it to exist once a month. It will leave your floor shining and require less budget and effort.

4. Auto Scrubbing

 It may not be practical with all services, but it may be more effective and secure to do so. It is more efficient than damp mopping at extracting soil while using fewer chemicals. Remember to follow the manufacturer’s directions for dilution and to use the correct cleaning pad. Auto scrubbing should be done once a month before buffing.

Do this cleaning routine regularly. Practicing these on your floors to keep them clean, shiny, and cost overall less than. 

Floor Maintenance Tips Depending on Their Material

1. Clean marble

White marble texture with natural pattern for background

To scrub, use cool water and a detergent or quality cleaner to mop the marble floors in overlapping strokes. After that, mop with clean water.

2. Vinyl Floors

Wooden brick floor wall structure textured white concept

You may clean vinyl floors with a paste made either from vinegar or detergent mixed with baking soda. Mix the paste with warm water. Make sure not to scrub and use water to clean afterward. Scrubbing can leave the floor rough, and water affects the glue underneath the vinyl. Dry off the mixture

If you want, use only a minimal amount of water or mop it off.

3. Tile Floors

White tiles textures background

Tile floors are the easiest to clean and maintain. Use water and detergent to wash the floor. Make sure you do not forget to use clean water afterward. If stubborn stains linger, make a paste of equal parts scouring powder and warm water and rub it on the stain. Allow for a 10-minute soak before scrubbing with a soft brush and rinsing with warm water.

4. Laminated Floor

Interior of lightroom with sofa on empty dark blue wall

The most powerful way to clean laminate floors is with hot water. If the floor is mainly filthy, you should add one or two spoons of baby shampoo to the spray. To stop walking on wet asphalt, make sure to wring out the mop before. Wipe it dry with a clean microfiber rag.

The Bottomline

Maintaining the floor is inflexible and costly. With the tips mentioned above, you can reduce the load and overall costs too. However, it requires effort and constant care initially at your end! We have also enlisted some DIY cleaners.